Download LS-DYNA for UNIX/Linux/Solaris

Table of Contents

• SMP LS-DYNA Version 971 R6.0.0
• MPP-DYNA Version 971 R6.0.0
• SMP LS-DYNA Version 971 R5.1.1
• MPP-DYNA Version 971 R5.1.1
• SMP LS-DYNA Version 971 R5.1
• MPP-DYNA Version 971 R5.1
• SMP LS-DYNA Version 971 R5.0
• MPP-DYNA Version 971 R5.0

To download other LSTC software products, return to the main LSTC Download Page

General Information

• Shared Memory Parallel (SMP)
  Information is communicated between processors using sharing memory.
• Message Passing Interface (MPI)
  Information is communicated using industry standard network-based MPI protocols.

PARALLEL	PRECISION	NAME
smp	single	ls971_s_R5_1_. . . .
smp	double	ls971_d_R5_1_. . . .
mpi	single	mpp971_s_R5_1_. . . .
mpi	double	mpp971_d_R5_1_. . . .

SMP executables can run on most systems without additional system software. So there are generally two SMP executables for a given hardware/OS combination. A downloadable file such as ls971_s_R5_1_0_amd64_redhat46.gz is a gzip archive containing a single executable:

1. ls971_s_R5_1_0_amd64_redhat46

MPI executables require the presence of an installed MPI subsystem. There are single and double precision versions of LS-DYNA for each supported MPI subsystem. A downloadable file such as mpp971_s_R5.1_64536_PGI_linux86-64_OpenMPI-141.tar.gz is a gzipped tar archive containing two files:

1. mpp971_s_R5.1_64536_PGI_linux86-64_OpenMPI-141
2. mpp971_s_R5.1_64536_PGI_linux86-64_OpenMPI-141.l2a

Other options may further increase the number of available archives.

SMP LS-DYNA Version 971, Revision 6.0.0       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
3. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
4. MADYMO COUPLING: Some versions of SMP LS-DYNA are built with the MADYMO coupling.
   • Look for MC in the NOTES column for versions of LS-DYNA with MADYMO.
   • Be sure to read the detailed MADYMO COUPLING README.
5. PLATFORM NOTES: There are notes about various supported platform concerning how to run and relink LS-DYNA.
   
   • HP/PA8000
   • IBM
   • IBM XLF COMPILER
   • SGI
   • SGI SCSL
   • SUN
   • PGI compiler libraries
6. ENVIRONMENT VARIABLES: Notes about common LS-DYNA environment variables are in this ENV VAR README.
7. RELEASE NOTES: Notes specifically about LS971 R6.0.0.

MPP-DYNA Version 971, Revision 6.0.0       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. RUNNING MPP-DYNA: MPP-DYNA executables must be started using MPI commands. Read about this in the HOWTO EXECUTE readme file.
3. SET UP: This README describes the archive contents, and how to configure your system to use run dynamically linked executables.
4. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
5. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
6. USER DEFINED MATERIALS: If the UM link appears to the left of the archive name, then a USERMAT Development Package is available for download by clicking on the UM link which preceeds the link to the MPP-DYNA archive. To link with your user-defined material modules, you must use the same compilers and operating system used to build the corresponding MPP-DYNA executable. For complete information about the compilers and OS we used, please consult the detailed README file. We do not support other compilers, operating systems, or versions of MPI other than those listed.
7. HYBRID: The HYBRID version of MPP-DYNA uses a combination of SMP and MPP.

SMP LS-DYNA Version 971, Revision 5.1.1       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
3. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
4. MADYMO COUPLING: Some versions of SMP LS-DYNA are built with the MADYMO coupling.
   • Look for MC in the NOTES column for versions of LS-DYNA with MADYMO.
   • Be sure to read the detailed MADYMO COUPLING README.
5. PLATFORM NOTES: There are notes about various supported platform concerning how to run and relink LS-DYNA.
   
   • HP/PA8000
   • IBM
   • IBM XLF COMPILER
   • SGI
   • SGI SCSL
   • SUN
   • PGI compiler libraries
6. ENVIRONMENT VARIABLES: Notes about common LS-DYNA environment variables are in this ENV VAR README.
7. RELEASE NOTES: Notes specifically about LS971 R5.1.1.

MPP-DYNA Version 971, Revision 5.1.1       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. RUNNING MPP-DYNA: MPP-DYNA executables must be started using MPI commands. Read about this in the HOWTO EXECUTE readme file.
3. SET UP: This README describes the archive contents, and how to configure your system to use run dynamically linked executables.
4. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
5. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
6. USER DEFINED MATERIALS: If the UM link appears to the left of the archive name, then a USERMAT Development Package is available for download by clicking on the UM link which preceeds the link to the MPP-DYNA archive. To link with your user-defined material modules, you must use the same compilers and operating system used to build the corresponding MPP-DYNA executable. For complete information about the compilers and OS we used, please consult the detailed README file. We do not support other compilers, operating systems, or versions of MPI other than those listed.
7. HYBRID: The HYBRID version of MPP-DYNA uses a combination of SMP and MPP.

SMP LS-DYNA Version 971, Revision 5.1       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
3. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in in the LSTC License Software INSTALLATION guide.
4. MADYMO COUPLING: Some versions of SMP LS-DYNA are built with the MADYMO coupling.
   • Look for MC in the NOTES column for versions of LS-DYNA with MADYMO.
   • Be sure to read the detailed MADYMO COUPLING README.
5. PLATFORM NOTES: There are notes about various supported platform concerning how to run and relink LS-DYNA.
   
   • HP/PA8000
   • IBM
   • IBM XLF COMPILER
   • SGI
   • SGI SCSL
   • SUN
   • PGI compiler libraries
6. ENVIRONMENT VARIABLES: Notes about common LS-DYNA environment variables are in this ENV VAR README.
7. RELEASE NOTES: Notes specifically about LS971 R5.1.

MPP-DYNA Version 971, Revision 5.1       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. RUNNING MPP-DYNA: MPP-DYNA executables must be started using MPI commands. Read about this in the HOWTO EXECUTE readme file.
3. SET UP: This README describes the archive contents, and how to configure your system to use run dynamically linked executables.
4. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
5. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
6. USER DEFINED MATERIALS: If the UM link appears to the left of the archive name, then a USERMAT Development Package is available for download by clicking on the UM link which preceeds the link to the MPP-DYNA archive. To link with your user-defined material modules, you must use the same compilers and operating system used to build the corresponding MPP-DYNA executable. For complete information about the compilers and OS we used, please consult the detailed README file. We do not support other compilers, operating systems, or versions of MPI other than those listed.
7. HYBRID: The HYBRID version of MPP-DYNA uses a combination of SMP and MPP.

SMP LS-DYNA Version 971, Revision 5.0       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
3. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
4. MADYMO COUPLING: Some versions of SMP LS-DYNA are built with the MADYMO coupling.
   • Look for MC in the NOTES column for versions of LS-DYNA with MADYMO.
5. PLATFORM NOTES: There are notes about various supported platform concerning how to run and relink LS-DYNA.
   
   • HP/PA8000
   • IBM
   • IBM XLF COMPILER
   • SGI (Browser may require you to download this file before viewing as text.)
   • SGI SCSL (Browser may require you to download this file before viewing as text.)
   • SUN (Browser may require you to download this file before viewing as text.)
   • PGI compiler libraries
6. ENVIRONMENT VARIABLES: Notes about common LS-DYNA environment variables are in this ENV VAR README.
7. RELEASE NOTES: Notes specifically about LS971 R5.0.

MPP-DYNA Version 971, Revision 5.0       (Back to Top)

1. BUILD INFORMATION: Contains Hardware/OS/Compiler information for all BUILDS
2. RUNNING MPP-DYNA: MPP-DYNA executables must be started using MPI commands. Read about this in the HOWTO EXECUTE readme file.
3. SET UP: This README describes the archive contents, and how to configure your system to use any required dynamic libraries.
4. LOCAL LICENSE: Be sure to read the INSTALLATION INSTRUCTIONS if you are using the program with a local (i.e., node-locked) license.
5. NETWORK LICENSE: To use LS-DYNA with a network license, read sections VII and VIII in the LSTC License Software INSTALLATION guide.
6. USER DEFINED MATERIALS: If the UM link appears to the left of the archive name, then a USERMAT Development Package is available for download by clicking on the UM link which preceeds the link to the MPP-DYNA archive. To link with your user-defined material modules, you must use the same compilers and operating system used to build the corresponding MPP-DYNA executable. For complete information about the compilers and OS we used, please consult the detailed README file. We do not support other compilers, operating systems, or versions of MPI other than those listed.
7. HYBRID: The HYBRID version of MPP-DYNA uses a combination of SMP and MPP.